ACT1003 PLUS Surface Snap Data Converter

• 3 Gigabit-Ethernet
• 1 Gigabit-POF
• No speed loss

Quick and easy connection

It has 1 full duplex port of Plastic Fiber Optic and 3 RJ45. It can be placed as the start or end point of a facility. As an end point, it allows the simultaneous connection of 3 devices via ethernet, delivering 100% of the speed of the original point. The data is transmitted through plastic optical fiber "POF" without guaranteed losses up to 50 meters and a maximum transmission speed of 1000 Mbps.

This equipment is characterized by:

• It has an internal 220 V power supply.
• Surface equipment fixed to the wall.
• IGMP Snooping protocol management.
• plastic fiber optic

Plastic fiber optics have great advantages over glass fibers or ethernet cables, the main ones being their high degree of flexibility, light weight, and resistance to electromagnetic interference. In addition, these fibers can be easily and universally deployed using any existing channeling, respecting the ICT2 Telecommunications Infrastructure Regulation.

Easy installation

The plastic optical fiber is only 2.2 mm thick. POF cables can be very easily installed in existing pipes with other electrical, telephone or TV cables. The length of the POF cables can be adapted with a simple cut. After laying the POF cable, the two ends of the cable are cut with the cutting tool and inserted into the converter. After that, you will have a Gigabit network connection available without the need to install ethernet cables in a prohibited, dangerous and unsightly way.