ACT1001 Snap Data Media Converter
Media converter with 1 RJ45 and 1 POF. Simple and the minimum possible expression of converter to transport the internet signal without loss within homes and / or enclosures. Includes its own power supply.
- 1 Gigabit-Ethernet
- 1 Gigabit-POF
- No Speed Losses
- Quick and easy connection
It has 1 full duplex port of Plastic Fiber Optics and 1 RJ45. It can be positioned as the start or end point of an installation. As an endpoint it allows the connection of 1 single device via Ethernet delivering 100% of the speed of the original point. The data is transmitted via "POF" plastic fiber optics without guaranteed loss up to 50 meters and a maximum transmission speed 1000 Mbps. The equipment comes with its own power supply and cable. The ACT 1001 are converters to which we have incorporated ABR technology. This system makes the two rosettes always connect to each other, even if they cannot carry 100% of our bandwidth. The ABR system has the advantage of being able to reach beyond 50 meters away between the two teams by lowering the communication speed. On the contrary, if the installation is correct and below 50 meters, then the speed is maintained at 1Gbps. Another reason to negotiate a transition with ABR below 1Gbps is if the cable has been damaged in the installation. Note that the ABR system will only work when you connect to the other side of the fiber another device with this functionality. Currently, only with another ACT1001, an ACT4001 and a built-in ACT1002. The ABR will not act against an ACT1003 and an ACT2003.
Plastic fiber optics
Plastic fiber optics have great advantages over fiberglass or ethernet cables, the main ones are its high degree of flexibility, light weight and resistance to electromagnetic interference. In addition, these fibres can be deployed easily and universally using any existing pipeline in compliance with the ICT2 Telecommunication Infrastructure Regulations.
Plastic fiber optics are only 2.2 mm thick. POF cables can be easily installed in existing pipes with other electrical, telephone or TV cables. The length of POF cables can be adapted with a simple cut. After laying the POF cable, the two ends of the cable are cut with the cutting tool and inserted into the ACT 1001 converter. After that, you will have a Gigabit network connection available without the need to install ethernet cables in a prohibited, dangerous and unsightly manner.